Honeywell ISA100 Gen X User Manual page 44

ISA100_NOTIFY_ALARM_REGEN_END
The Sensor generates alarm regen end message to the Radio board, one per category of alarms
basis, when all the pending alarms are issued. The 1-byte data value carries the 1- byte
category value.
Note: The Radio board also sends an acknowledgement to the sensor when it receives the
alarm regen end message.
Synch Byte Packet
Length
0x5A 0x04
ISA100_ADD_UAP_ALARM
This message is generated by the Sensor board to send an alarm to the system. This message
is specially treated from the other ASL message because this message needs to be added to
ARMO queue present in the Radio board. The data contains the standard alarm message as
described in the ISA100 standard.
Synch Byte Packet
Length
0x5A 0x0F
Byte 1,
Byte 0
Byte 2
UAP ID SOID
44
Packet Packet
Class Type
0x30 0x8D
Packet Packet
Class Type
0x30 0x1E
Byte3 Byte4 Byte4
Alert Alert Aler
Class Directio t
n Typ
e
ISA100 Gen X Radio Module User's Guide
Honeywell
Packet Packet Check
ID size sum
0x01 0x00 XX
Packet Packet
ID size
0x01 0x0B
Byte5 Byte6
Alert Alert
Priorit Categor
y y
Check
sum
XX
Data Bytes Check Check
0-N sum sum
Description
XX XX
Below
Byte7 Byte8-ByteN
Alert value length Alert Value
Release Independent
April 2018