Table of Contents
Advertisement
4
1. Safety Precautions
This section describes relevant warning symbols recurring in the installation and operation manual of AEG three-phase
solar inverters of the series AS-IC01 and AS-IC01-2. Icons highlight relevant information for the physical and property
safety of the user. Compliance to the provided instructions is essential to prevent physical injury and product damage.
1.1 Icons
Below is a list of the icons used in this manual:
Icon
1.2 Safety Guidelines
5 minutes
PD201809 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (4-10 kW) V.2-18 EN
Meaning
Instruction
Serious physical injury or even death may occur in case of
Danger
noncompliance with the requirement.
Physical injury or product damage may occur in case of
Warning
noncompliance with the requirement.
Damage may occur in case of
Prohibited
noncompliance with the requirement.
Hot surface
Product surface may become hot. Do not touch.
Note
Useful information for product maintenance and operation is provided
Look for any visible damage to the package or the product itself. Double-check the order information
and the product nameplate to ensure the products are of the ordered type. Should you find any
problems, contact the shipping company and / or your supplier as soon as possible before attempting
product installation.
Only qualified electricians are allowed to install the inverter.
Do not carry out any wiring and inspection nor change components when the inverter is connected
to power supply. Hazardous voltages may still be present in the inverter even when the AC and DC
main switches are turned off. Ensure that DC and AC side circuit breakers have been disconnected
and wait at least 5 minutes after switching off the inverter to undertake any operation on the inverter.
This ensures that the capacitors are electrically discharged.
Table 1: Icon meaning
4
Advertisement
Table of Contents
