Table of Contents
Advertisement
32
Inverter state
Manual turn off
5.2 Operation panel
There are 4 buttons on the panel:
1.
"ESC", exit and return ;
2.
" ", back to the front page and data increasing;
3.
" "，to the next page and data decreasing;
4.
5.3 LCD screen
All relevant information and parameters can be accessed from the LCD screen. The background illumination of the LCD
screen will dim out for power saving upon 15 seconds of inactivity. It can be activated again by pressing any button. Press
"ENT" to access the main interface when the background illumination is on.
The main interface appears by default when the inverter is powered on. The individual menu interfaces can be accessed
for monitoring data, for setting different parameters and for carrying out other manual operations. Individual menu
interfaces allow you to view the monitoring parameters and record history, to access system information, statistics and
faults information, to set the display language, time, communication address and password, and to change the inverter
back to factory settings among others.
PD201809 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (4-10 kW) V.2-18 EN
LED indicators
Run
Warn
Fault
Run
Warn
Fault
Please refer to chapter 5 and 7 for detailed fault information and troubleshooting.
"ENT", enter.
Hardware or software fault (E003, E004, E005, E008, E009,
E011, E013 or E015). De-couple the inverter from the system
before maintenance.
Red indicator is on, others are off :
Current-leakage or unqualified output power energy of the
inverter (E007, E010, E014, E017, E018 or E020). De-couple the
inverter from the system before maintenance.
All indicators are on:
Stop after the communication or panel command.
Table 15: Inverter states
Curve Graphic
Text Parameter
Display Area
Display Area
Status Area
Fault Code
Figure 16B: Main interface
Description
Menu
32
Advertisement
Table of Contents
