New And Changed Features For Firmware Release 10.4(1)Sr1; New And Changed Features For Firmware Release 10.4(1); Phone Setup; Adjust The Handset Rest - Cisco 7811 User Manual

Your Phone

New and Changed Features for Firmware Release 10.4(1)SR1

Revision
Added Multicast paging support

New and Changed Features for Firmware Release 10.4(1)

Revision
Added Speed-Dial support on a line key
Added Provisioning Authority support
Added Busy Lamp Field support

Phone Setup

Typically, your administrator sets up your phone and connects it to the network. If your phone is not set up
and connected, contact your administrator for instructions.

Adjust the Handset Rest

If your phone is wall-mounted or if the handset slips out of the cradle too easily, you may need to adjust the
handset rest to ensure that the receiver does not slip out of the cradle.
New and Changed Features for Firmware Release 10.4(1)SR1
Updated Section
Page a Group of Phones (Multicast Paging), on page
37
Updated Section
Configure a Speed Dial on a Line Key, on page 26
Remove a Speed Dial from a Line Key, on page 26
Sign into Your Extension from Another Phone, on
page 7
Sign out of Your Extension from Another Phone, on
page 8
Monitor a Coworker's Line, on page 9
Cisco IP Phone 7800 Series Multiplatform Phones User Guide
5