New Information For Firmware Release 12.5(1)Sr3; New Information For Firmware Release 12.5(1)Sr2; New And Changed For Firmware Release 12.5(1) And 12.5(1)Sr1 - Cisco 7800 Series Accessories Manual

Accessories Overview

New Information for Firmware Release 12.5(1)SR3

Table 5: Cisco IP Phone 7800 and 8800 Series Accessories Guide Revisions for Firmware Release 12.5(1)SR3.
Revision
Reset Cisco Headset Settings to the Administration settings

New Information for Firmware Release 12.5(1)SR2

No documentation updates were required for Firmware Release 12.5(1)SR2.
Firmware Release 12.5(1)SR2 replaces Firmware Release 12.5(1) and Firmware 12.5(1)SR1. Firmware
Release 12.5(1) and Firmware Release 12.5(1)SR1 have been deferred in favor of Firmware Release 12.5(1)SR2.

New and Changed for Firmware Release 12.5(1) and 12.5(1)SR1

Table 6: Cisco IP Phone 7800 and 8800 Series Accessories Guide Revisions for Firmware Release 12.5(1) and 12.5(1)SR1.
Revision
Cisco Headset 561 and 562
Cisco Headset 561 and 562 Multibase
Support for Remote Configuration of Headset Parameters
New Accessories Information for 12.1(1)SR1
Table 7: Cisco IP Phone 7800 and 8800 Series Accessories Guide Revisions for Firmware Release 12.1(1)SR1.
Revision
Updated for Cisco Wallpaper on Key Expansion Modules.
Cisco IP Phone 7800 and 8800 Series Accessories Guide for Cisco Unified Communications Manager
New Information for Firmware Release 12.5(1)SR3
Updated Section
Reset Cisco Headset Settings from Your Phone, on page 42
Updated Section
Cisco Headset 500 Series, on page 9
Cisco Headset 561 and 562 with Multibase, on page 18
Headset Management on Older Versions of Cisco Unified
Communications Manager, on page 30
Updated Section
Change the Wallpaper, on page 60
7