Single Channel Control Card Physical Layout - Honeywell 5701 Operating Instructions Manual

MAN0443.P65 Issue 13 Aug 04
05701-M-5001 A02279
CHAPTER 2 - SYSTEM DESCRIPTION
4.5

Single Channel Control Card Physical Layout

The physical layout of the Single Channel Control Card is shown below.
The Sensor Drive Modules plug into the 14-way connectors J1 and J2
while the Analogue Output Module, when fitted, plugs into J3 and J4. Link
LK1, available on MkII cards only, is used when individually powering
control cards See Chapter 4, Section 16.2.
32-Way Socket (SK2)
To Backplane
8-Way Analogue
Output Module
Connectors
Liquid Crystal
Display
15-Way D Type Socket
Link LK1
Fuse
(MkII Cards
FS1
Only)
2 - 10
5701 Control System
(SK1) To Interface or
Relay Cards
Reset/Select
LEDs
Push Button
Switch
14-Way
Connectors
To Sensor
Drive Modules