Calibration - Honeywell 5701 Operating Instructions Manual

MAN0443.P65 Issue 13 Aug 04
05701-M-5001 A02279
CHAPTER 5 - COMMISSIONING AND
MAINTENANCE INSTRUCTIONS
3.

CALIBRATION

Leave the connected sensors to stabilise for a suitable period as
specified in the sensor manual.
Adjust the sensor head current of catalytic sensors as described in
Chapter 7 Section 7 to the required value as indicated in the sensor
operating instructions.
Using the procedures for the type of sensors being used, follow the
zero and 1st span operational guide in Chapter 7 Sections 8 and 10,
and calibrate each channel.
5 - 6
5701 Control System