Racks - Honeywell 5701 Operating Instructions Manual

MAN0443.P65 Issue 13 Aug 04
05701-M-5001 A02279
CHAPTER 2 - SYSTEM DESCRIPTION
2.

RACKS

Each rack assembly contains a sub-rack, Engineering Card, DC Input
Card, key kit and where necessary an interconnecting cable.
Dependent upon configuration, the control system is housed in one of
four standard size sub-racks as follows:
a. Full 19 inch wide by 3U high - Part Number 05701-A-0511,
b. Full 19 inch wide by 6U high - Part Number 05701-A-0501,
c. Half 19 inch wide by 3U high - Part Number 05701-A-0512,
d. Half 19 inch wide by 6U high - Part Number 05701-A-0502,
All four versions have two separate chambers. One is sealed against
electromagnetic interference and contains the control cards while the
other chamber contains the field/relay interface cards. A backplane
between the two chambers provides a path for signal routeing between
individual cards and the Engineering Card, and power supply
distribution.
Typical Eight Channel Rear Access Rack - Front View
for rear field wiring connections.
for front field wiring connections.
for rear field wiring connections.
for front field wiring connections.
2 - 4
5701 Control System