General - Honeywell 5701 Operating Instructions Manual

MAN0443.P65 Issue 13 Aug 04
05701-M-5001 A02279
CHAPTER 5 - COMMISSIONING AND
MAINTENANCE INSTRUCTIONS
High ac mains voltages may be present at the system power supply
unit and at the relay terminals of the interface cards. Appropriate
safety precautions must be taken when commissioning or servicing
the system.
Commissioning and maintenance of the system should be carried out
by trained authorised personnel only.
1.

GENERAL

The following guide to commissioning and maintenance should be
used in conjunction with the relevant instructions issued with the
sensors being used.
The following information applies to the setup of a system with a single
power supply connection to the DC Input Card. For information on
systems where power is applied to each individual channel, please
contact Zellweger Analytics.
WARNING
IMPORTANT
5 - 3
5701 Control System