Honeywell 5701 Operating Instructions Manual page 183

MAN0443.P65 Issue 13 Aug 04
05701-M-5001 A02279
CHAPTER 7 - ENGINEER'S OPERATING
INSTRUCTIONS
TEST .
LTEL
Note: 1. A selected control card may be deselected while in the TEST
mode by pushing the selected control card front panel RESET/
SELECT push-button. The simulated gas level and relay
states will remain set allowing several control cards to be
tested simultaneously. When the control card is reselected
the card will return to the TEST mode.
2. If the inhibit is removed, the external relays will operate.
When the TEST mode is used, always ensure that the channel control
card is returned to the uninhibited state after the test.
IMPORTANT
7 - 10
5701 Control System