Triple Dpco Relay Card - Honeywell 5701 Operating Instructions Manual

MAN0443.P65 Issue 13 Aug 04
05701-M-5001 A02279
CHAPTER 2 - SYSTEM DESCRIPTION
5.5 Triple DPCO Relay Card (Part Number 05701-A-0329)
5.5.1 General
Provides connections between the sensor and the control card in the
same way as the Field Interface Card. In addition, single pole relays
provide voltage free contact outputs for 2 x A1 alarm level, 2 x A2
alarm level, 2 x A3 alarm level, fault and inhibit conditions.
5.5.2 Rear Access Connections
Fault NC
Fault COM
Inhibit NC
A1(1) NC
A1(1) COM
A2(1) NC
A3(1) NC
A3(1) COM
A1(2) NC
A2(2) NC
A2(2) COM
A3(2) NC
Ground
Sensor S Connection
Sensor NS Connection 29
Analogue O/P (+)
Remote Inhibit In
+24V (Out/In)
NC = Normally Closed.
Relay contact conditions refer to the no power state of the relay.
1
3
5
7
9
11
13
15
17
19
21
23
25
27
31
33
35
NO = Normally Open. COM =
2 - 18
5701 Control System
Slot
Location
2 Fault NO
4 Inhibit COM
6 Inhibit NO
8 A1(1) NO
10 A2(1) COM
12 A2(1) NO
14 A3(1) NO
16 A1(2) COM
18 A1(2) NO
20 A2(2) NO
22 A3(2) COM
24 A3(2) NO
26 Ground
28 Sensor 01 Connection
30 Not Connected
32 Analogue O/P (-)
34 Remote Reset In
36 0V (Out/In)
User
Terminal
Reference
Common.