Calibration - Honeywell 5704 Operating Instructions Manual

MAN0448_Issue 13_ 01-2010
005704-M-5001 A03249
CHAPTER 5 - COMMISSIONING AND
MAINTENANCE INSTRUCTIONS
3.

CAlIBRATION

Leave the connected sensors to stabilise for a period as specified in
the sensor manual.
Adjust the sensor head current of catalytic sensors as described in
Chapter 7 Section 7 to the required value as indicated in the sensor
operating instructions.
Using the procedures specified for the type of sensors being used,
follow the zero and 1st span operational guide in Chapter 7 Sections
8 and 10, and calibrate each channel.
5-5
5704 Control System