SXM2 extension tray
11.7.3 Installing the SXM2 base board
Figure 306: Installing the SXM2 base board (A)
Ê At a slight angle, lower the SXM2 base board into the chassis as shown.
Figure 307: Installing the SXM2 base board (B)
Ê Carefully shift the SXM2 base board in the direction of the arrow until the
plug shells engage with the cut-outs in the I/O panel.
Ê Fasten the SXM2 base board with 7 screws (see circles).
11.7.4 Concluding steps
Perform the following procedures:
Ê Install the SXM2 riser cards, see section
page 408
and
416
"Installing the SXM2 riser (L) type 1" on page
Upgrade and Maintenance Manual
"Installing the SXM2 riser (R)" on
410.
CX2550/60/70 M4