Replacing The Lc Heat Sinks; Preliminary Steps; Removing The Lc Heat Sinks - Fujitsu PRIMERGY CX2560 M4 Upgrade And Maintenance Manual

8.5

Replacing the LC heat sinks

Field Replaceable Unit
(FRU)
Tools: – Phillips PH2 / (+) No. 2 screw driver
8.5.1

Preliminary steps

Before replacing the CPU heat sink, perform the following steps:
"Disabling the boot watchdog functionality of ServerView Operations
Ê
Manager" on page 73
"Shutting down the server node" on page 50
Ê
Ê If applicable, remove all external cables from the server node.
"Removing the server node from the server enclosure" on page 51
Ê
8.5.2

Removing the LC heat sinks

Ê Remove the LC heat sink, see section
page 224.
Ê Remove the CPU frame from the CPU heat sink, see section
CPU type 1" on page
CX2550/60/70 M4
231.
Upgrade and Maintenance Manual
Hardware: 15 minutes
"Removing the LC heat sinks" on
Processor (CPU)
"Removing the
259