Concluding Steps - Fujitsu PRIMERGY CX2560 M4 Upgrade And Maintenance Manual

8.5.4

Concluding steps

Perform the following steps:
"Installing the server node in the server enclosure" on page 67
Ê
I
If the Global LED is flashing with error message "CPU has been
changed" on display after the system is powered on, please follow the
procedure below.
Ê Restart the system and wait until the screen output appears.
Ê Press the [F2] function key.
Ê If a password is assigned, enter this password and confirm with the
[Enter] key.
The BIOS setup Main menu will be displayed on the screen.
Ê Select "Commit settings and Exit" on Exit menu.
Confirm LED no flashing.
Ê
This information is only regarding to the change of CPU configuration.
There is no technical problem.
– If applicable, reconnect all external cables.
– "Switching on the server node" on page 69
– "Updating or recovering the system board BIOS and iRMC" on page 77
applicable)
– "Controls and indicators on the server node" on page 448
– "Resetting the error status after replacing CPUs" on page 103
– "Enabling SVOM boot watchdog functionality" on page 88
CX2550/60/70 M4
Upgrade and Maintenance Manual
Processor (CPU)
(if
261