Replacing The Power Interface Board (Pib); Preliminary Steps; Removing The Pib - Fujitsu PRIMERGY CX2560 M4 Upgrade And Maintenance Manual

GPGPU extension tray

10.11 Replacing the Power Interface Board (PIB)

10.11.1 Preliminary steps

Perform the following procedures:
"Disabling the boot watchdog functionality of ServerView Operations
Ê
Manager" on page 73
Ê Locate the desired server node with the ID button.
"Shutting down the server node" on page 50
Ê
Ê If applicable, remove all external cables from the server node.
"Removing the server node from the server enclosure" on page 51
Ê

10.11.2 Removing the PIB

Figure 232: Disconnecting power cables and I2C cable from the PIB
Ê Disconnect the power cables of GPGPU 1 (1), GPGPU 2 (2) and the I2C
cable (3) from the PIB.
352
3
2
1
Upgrade and Maintenance Manual
CX2550/60/70 M4