System board and components
Safety notes
V
CAUTION!
The CMOS battery must be replaced with an identical battery or with
●
a battery type recommended by the manufacturer.
Keep lithium batteries away from children.
●
Do not throw batteries into the trash can. Lithium batteries must be
●
disposed of in accordance with local regulations concerning special
waste.
For further safety information, see section "Environmental protection"
●
in the PRIMERGY CX2550 M4 / CX2560 M4 / CX2570 M4 Operating
Manual.
Ensure to insert the CMOS battery with the positive pole facing
●
up!
9.1.1
Preliminary steps
Perform the following procedures:
Ê Locate the desired server with the ID button.
"Shutting down the server node" on page 50
Ê
Ê If applicable, remove all external cables from the server node.
"Removing the server node from the server enclosure" on page 51
Ê
Ê Remove the right riser module, see section
page
58.
266
Upgrade and Maintenance Manual
"Removing the riser module" on
CX2550/60/70 M4