10.10 Replacing the GPGPU riser (L)
I
This section describes how to replace the GPGPU riser (L)-P1. The
GPGPU riser (L)-P2 is replaced in the same way.
For information about PCI riser (L) variants see figure
cards" on page
10.10.1 Preliminary steps
Perform the following procedures:
"Disabling the boot watchdog functionality of ServerView Operations
Ê
Manager" on page 73
Ê Locate the desired server node with the ID button.
"Shutting down the server node" on page 50
Ê
Ê If applicable, remove all external cables from the server node.
"Removing the server node from the server enclosure" on page 51
Ê
"Removing the GPGPU extension from slot GPGPU 1" on page 328
Ê
applicable)
"Removing the GPGPU extension from slot GPGPU 2" on page 338
Ê
applicable)
"Removing the GPGPU / SXM2 extension tray" on page 53
Ê
CX2550/60/70 M4
322.
Upgrade and Maintenance Manual
GPGPU extension tray
"GPGPU riser
(if
(if
349