Register Allocation For Function 03 / 06 / 16 - Read / Write Holding Registers; Table 25. Modbus Channel Animation Register; Table 26. Modbus Channel Animation Register Continued - Honeywell Touchpoint Pro Technical Handbook

11.2.3 Animation Registers
A group of animation values are allocated for registers 30065 to 30128. These are intended to be used by graphics
packages for defining the colours of various screen objects based upon the status of a channel.
A 16 bit unsigned word format is used.
The data value for each register can be one of the following:
11.3 Register Allocation for Function 03 / 06 / 16 – Read / Write Holding Registers
All registers use 16 bit data words.
The Channel Type field identifies the channel as Input or Output. The decimal value 105 (= ASCII 'i') is used for Inputs, the
decimal value 111 (= ASCII 'o') for Outputs. The decimal value 6 together with channel ID 0 is used for master commands.
Function 16 can be used to write to the 40n01 to 40n04 and 41n01 to 41n05 (n = 0 to 9) ranges of registers only.
Caution: When using Function 6 or Function 16, ensure that the registers related to the command are completely filled
before setting the Block Active flag; otherwise an unintended command may be performed.
11.3.1 Query Poll Registers
Query Poll
Block Active
Block
1
2
3
4
5
Part. No. 2400M2501_6
CONFIGURATION
Channel
01
02
↓
64

Table 25. Modbus Channel Animation Register

Value
0
1
2
3
4
5
6
7
8
9
10
11 or higher

Table 26. Modbus Channel Animation Register Continued

Channel Type
40001 40002
40101 40102
40201 40202
40301 40302
40401 40402
Animation Register
30065
30066
↓
30128
Status
Channel operating normally
RATE alarm active
LTEL alarm active
STEL alarm active
A1 alarm active
A2 alarm active
A3 alarm active
Fault active
Inhibit active
Not used
Not used
No data available
Channel ID Query Type
40003 40004
40103 40104
40203 40204
40303 40304
40403 40404
98
Result Result String
40005 40006 to 40036
40105 40106 to 40136
40205 40206 to 40236
40305 40306 to 40336
40405 40406 to 40436
Touchpoint Pro
Technical Handbook