Honeywell Touchpoint Pro Technical Handbook page 174

TECHNICAL SPECIFICATIONS
21.2.3 Zone 2 Division 2 Remote Wall Unit Enclosure without User Interface
Substitution of components may impair suitability for Class 1 Div.2, Class 1 Zone 2, and Zone 2 [ATEX] non-
Substituer des composants peut compromettre la conformité de la Classe 1 Div.2, Classe 1 Zone 2, et de la Zone 2
Wiring to and from this enclosure must utilise wiring methods suitable for Class 1 Div.2, Class 1 Zone 2, and Zone 2
Le câblage de ce boîtier doit respecter les méthodes d'installation appropriées en ce qui concerne les zones
Ne pas déconnecter les terminaux ou supprimer les modules lorsque l'appareil est sous tension.
This wall mounted enclosure is certified for use in hazardous areas / locations (Class 1 Div.2, Class 1 Zone 2, and Zone 2
[ATEX]). This enclosure can only be used as a remote unit due to its classification, and no User Interface option is available.
This unit is IP 66 Type 4 & 4x and can be installed indoors or outdoors in a Pollution Degree 4 environment, and can be
exposed to rain, snow and direct UV rays (sunlight).
Part. No. 2400M2501_6
Do not open when a flammable gas atmosphere is present.
(Class 1 Div.2, Class 1 Zone 2, and Zone 2 [ATEX])
Ne pas ouvrir l'équipement dans des atmosphères contenant des gaz inflammables.
(Classe 1 Div.2, Classe 1 Zone 2, et Zone 2 [ATEX])
WARNING: EXPLOSION HAZARD
AVERTISSEMENT: RISQUE D'EXPLOSION
[ATEX] pour l'approbation de produits non inflammables.
[ATEX] Hazardous Locations as appropriate to the installation.
dangereuses de la Classe 1 Div. 2, de la Classe 1 Zone 2 et de la Zone 2 [ATEX].
Do not disconnect terminals or remove modules when energised.
(Class 1 Div.2, Class 1 Zone 2, and Zone 2 [ATEX])
(Classe 1 Div.2, Classe 1 Zone 2, et Zone 2 [ATEX])
WARNING
AVERTISSEMENT
incendive approval.
WARNING
AVERTISSEMENT
WARNING
AVERTISSEMENT
167
Touchpoint Pro
Technical Handbook