Communication Settings - Honeywell 6824 User Manual

Advanced Settings (continued)
Setting
Form Length
Lines per Page
Top of Form
Top Margin
Left Margin
Tear

Communication Settings

6824 Mobile Full Page Printer User Manual
Description
Form length specified in lines or inches:
•
1 to 126 LINES: Specified in number of lines. Corresponds to
ESC "C", Set Page Length in Lines.
•
3 to 15 INCHES: Specified in inches. Corresponds to ESC "C"
(0), Set Page Length in Inches.
Note that this distance is the total length of the form from top to
bottom, including the distance you set for Top of Form.
Printable lines in one page. Range is 1 to 126 lines.
This value includes the number of lines to skip set by the Top
Margin value.
Specifies the amount (in inches) of space from the top of the form
to be skipped before printing the first line. Range is 0/60 to 99/60.
Specifies an additional amount of space to skip after the Top of
Form distance before printing. Range is 0 to 125 lines.
This value counts as part of the Lines per Page setting.
Specifies the number of left columns to be skipped. Range is 0 to
255 columns. Corresponds to ESC "I", Set Left Margin.
Advances a form to the tear position automatically after printing:
•
AUTO 1 SEC to AUTO 5 SEC: Form is automatically moved to
the tear position if the printer does not receive the next job
within the specified time (1 to 5 seconds).
•
MANUAL: User must press READY to manually move the form
to the tear position.
•
NO TEAR OFF: Form does not move automatically and user
cannot manually move the form.
Note: If you change the settings for Form Length, Top of Form, Top Margin, or
Lines per Page, the Configuration Utility prompts you to reload paper.
This section lists the communication settings for the printer. To view these
settings, in the Printer Configuration Utility click the Communication Settings
tab.
Note: Because the serial and Bluetooth connections share a common interface,
changing these communication settings affects both the serial and Bluetooth
connections. Changing the serial connection settings will prevent Bluetooth from
operating correctly. Restoring the default serial connection settings also restores
Bluetooth connectivity. To restore the default settings, press and hold READY
the next time you turn the printer on.
Chapter 3 – Configure the Printer
Default
11 INCHES
66 LINES
0/60 INCH
0 LINE
0 COLUMN
AUTO 1 SEC
35