Upload Fonts Or Firmware With The Configuration Utility - Honeywell 6824 User Manual

Chapter 3 – Configure the Printer
Two-Part Carbon-Interleaved Media
Parts Spec (g/m2)
Top 40 to 64
Carbon One sheet
Bottom 40 to 81
Three-Part Carbon-Interleaved Media
Parts Spec (g/m2)
Top 40 to 64
Carbon One sheet
Middle 40 to 64
Carbon One sheet
Bottom 40 to 81
Upload Fonts or Firmware With the Configuration
Utility
42
Layer Thickness
(Min–Max, in mm)
.051 to .082
.030
.051 to .104
Layer Thickness
(Min–Max, in mm)
.051 to .082
.030
.051 to .082
.030
.051 to .104
To upload fonts or firmware to the printer, you use the Printer Configuration
Utility.
•
Firmware files can be downloaded from honeywellaidc.com.
•
For more information on obtaining fonts, contact Honeywell Technical
Support.
To use the Configuration Utility, you need a Bluetooth connection between your
PC and the printer.
Caution: Do not disconnect or turn off the printer while files are being uploaded.
Total Thickness
(Min–Max, in mm)
.133 to .216
Total Thickness
(Min–Max, in mm)
.214 to .329
6824 Mobile Full Page Printer User Manual
Gap Setting
1.2 or 2.0
Gap Setting
2.2 or 3.0