Connecting the printer to your PC
You can use any of the following cables to connect the printer to your PC:
Using USB cable to connect the printer
This printer supports connection to PC using USB cable, without requiring setting any
specifications for USB communication.
Note: You must install InterDriver before you can use USB cable to connect the printer
to a Windows PC. For more information please refer to the Printer Companion CD
provided along with the printer or the above instructions on installation.
1. Download and install InterDriver on your PC;
2. Connect one end of the USB cable to the USD port at the rear of the printer.
Connecting the printer using serial communication cable
If your printer is equipped with factory-installed optional serial port, you can connect it
with the PC's serial port.
1. Connect one end of the serial communication cable to the port at the rear of the
2. Use the printer portal or simple diagnostic tools to configure the serial port setting.
18
USB cable;
Serial cable (optional).
Connect the other end to your PC during the installation of InterDriver when
prompted.
printer. Connect the other end to the PC;
Chapter 2: Connecting the Printer
User Instructions for PC42d Desktop Printer