How To Restore Default Settings; Restore Default Settings With The Print Button - Honeywell PC42t User Manual

Printer Problems and Possible Solutions (continued)
Problem
The printer continues to print or
feed when it should stop
printing

How to Restore Default Settings

If you need to restore factory defaults at any time, you can use:
•
•
•

Restore Default Settings with the Print Button

The easiest way to reset the printer to the factory default settings is with
the Print button.
1 Turn off the printer.
2 Press in on the cover latches on both sides of the printer and open
3 Press in on the top of both locking tabs to open the print and ribbon
4 Turn the printer on.
5 When the status LED starts blinking green, press and hold the Print
6 Make sure the media is loaded correctly.
7 Close the print and ribbon mechanism.
8 Close the cover.
PC42t Desktop Printer User Guide
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Chapter 3 — Troubleshoot and Maintain the Printer
Possible Solution
Check to see if a stuck label is blocking the label gap
sensor. Open the top cover, remove the label, and clean the
printhead. For help, see "Clean the Printhead" on
page 35.
the Print button.
the printer web page.
PrintSet.
the cover.
mechanism.
button until the status LED turns off.
V10 CONSUMIBLES S.L.
33