Toggle Settings
Item
Scenario
1
Thin media or the media and ribbon
requires lower pressure to print well or
DT media
2
Thick media or the media requires
high pressure to print well
3
Light Printing on the left side of the
label
4
Light Printing on the right side of the
label
5
Media moves from left side to right
side during printing
6
Media moves from right side to left
side during the printing
7
Media and ribbon slippage during
printing at retract mode
8
Narrow media (less than 2inch)
PX940 User Guide
Printhead Toggle Setting
Decrease the pressure on both left and right
toggles.
Increase the pressure on both left and right
toggles.
Increase the pressure on the left toggle.
Increase the pressure on the right toggle.
Increase the pressure on the left toggle or
decrease the pressure on the right toggle.
Increase the pressure on the right toggle or
decrease the pressure on the left toggle.
Increase the pressure on both left and right
toggles.
Move the left toggle to the center of the media
and decrease the pressure on the right toggle.
23