Table of Contents
Advertisement
Appendix A – Specifications and Command Lists
Factory Default Settings (continued)
Setting
Parity
Bit Rate
Media Specifications
Material Breakdown
52
Default
None
19.2 K
Caution: Using paper that matches the following specifications ensures
optimum performance. Variation from these specifications, use of aged paper, or
use of paper exposed to elements such as dirt or humidity may cause printing
problems.
The printer works with 1-3 ply carbonless paper that is single-edge glued and
designed for sprocket feed. Standard paper size is 8.5 x 11 inches or 241 x 305
mm international (8.5 x 12 in). Use 3-ply forms up to a maximum of 0.23 mm
(0.009 in) thick.
A soft, flexible, rubber type cement applied to one perforation strip only is
preferred. The paper should wrap around a 1 1/4 in diameter roll without curl or
wrinkle.
This section includes information on supported fanfold media for the printer.
14# CBF (Carbonless Back and Front)
Basis Weight
Caliper
Moisture
Smoothness (RS)
Smoothness (CB)
Brightness (Wht)
15# CBF (Carbonless Front)
Basis Weight
Caliper
Moisture
Smoothness (RS)
Smoothness (CB)
Brightness (Wht)
Target (lb)
Under (lb) Over (lb)
14
13.3
2.9
2.6
5.0
4.0
165
110
270
220
88
86
Target (lb)
Under (lb) Over (lb)
15
14.43
3.0
2.5
5.0
4.0
140
100
140
100
85
84
6824 Mobile Full Page Printer User Manual
14.7
3.2
6.0
230
320
90
15.8
3.2
6.0
180
180
86
Hide quick links:
Advertisement
Table of Contents
