Honeywell 6824 User Manual page 79

Select Double-Strike Mode (continued)
ASCII:
Cancel Double-Strike Mode
Description:
Decimal:
Hex:
ASCII:
Select Double-Wide Mode
Description:
Decimal:
Hex:
ASCII:
Cancel Double-Wide Mode
Description:
Decimal:
Hex:
ASCII:
Select Double-Wide Print
Description:
Decimal:
Hex:
ASCII:
Cancel Double-Wide Print
Description:
Decimal:
6824 Mobile Full Page Printer User Manual
ESC "G"
Cancels double-strike mode.
27 72
1B 48
ESC "H"
Enables double-wide print for the current line only. The previously set mode returns on
subsequent lines. However, double-wide print can be canceled with Cancel Double-
Wide Mode (DC4) or Cancel Double-Wide Print (ESC "W" (0)) before the end of the
current line or wrapping of the print buffer. This works with all three pitches (Pica, Elite,
Compressed). Double-wide mode is also terminated by the execution of a Carriage
Return, Line Feed, Form Feed, Vertical Tab or wrapping of the print buffer.
27 14
1B 0E
ESC SO
Cancels double-wide print for the current line only. Modes set previously return on
subsequent lines. However, this control code does not cancel the double-wide mode if
that mode is set by Select Double-Wide Print (ESC "W" 1*) or Master Select (ESC "!").
27 20
1B 14
ESC DC4
Enables double-wide print until canceled. This mode is disabled by default.
27 87 1*
1B 57 01*
ESC "W" 1*
Cancels double-wide print mode.
27 87 0*
Appendix B – Printer Control Codes
69