Use The Scan Demo App; How To Change The Default Symbology Settings In The App - Honeywell CN75 User Manual

Use the Scan Demo App

Use the Scan Demo app to read bar codes, or to test your symbology decode
settings.
1. Tap All Apps > Demos.
2. Swipe left or right on the screen until the Scan Demo app is selected.
3. Tap on the center of the box image to open the app.
4. Aim the scanner window at the bar code and press and hold the Scan button.
5. Center the aiming beam over the bar code. When the scanner successfully
Note: In the Scan Demo app, not all bar code symbologies are enabled by default. If a bar
code does not scan, the correct symbology may not be enabled.

How to Change the Default Symbology Settings in the App

To enable or disable decoding for specific symbologies:
1. In the Scan Demo app, tap
2. Tap the box next to a symbology name to enable (check mark) or disable (no
3. (Optional) Tap the Symbology name to see and modify additional configuration
46
The selected application is listed below the turntable.
scans the bar code, the computer beeps, and the Good Read LED briefly turns
on. A list of bar code information appears.
check mark) decoding for that symbology.
settings for the symbology selected.
and select Symbology Settings.
75 Series Mobile Computer User Guide