To save power, the computer enters Sleep mode automatically if left inactive. Sleep
mode turns off the screen and activates the screen lock. You can change the time
limit before Sleep mode activates.
Note: By default, the computer enters Sleep mode automatically after the computer is
inactive for a programmed period of time. To modify the timeout limit, select All Apps
> Settings > Display > Sleep.
Configure the Screen Brightness
You can configure the screen brightness in the Settings app.
1. Tap All Apps > Settings > Display.
2. Modify one of the following:
Configure Sleep Mode
By default, the computer enters Sleep mode automatically after the computer is
inactive for a programmed period of time. To modify the timeout limit:
1. Tap All Apps > Settings > Display.
2. Tap Sleep.
3. Select the amount of inactive time (minutes) before Sleep mode activates.
About the CK75 Cold Storage Model Heater
CK75 Cold Storage (CS) models come equipped with touch screen and scan
window heaters to support extended use in freezers as well as transitions into and
out of freezer areas.
CK75 cold storage models have external temperature monitoring enabled by
default to determine when the computer enters a cold storage environment. Once
the ambient temperature drops below the Heater enable temperature, the system
starts a Chill timer.
Once the Chill timer expires, the system operates in one of two configurable
modes:
•
20
•
To have the computer automatically adjust the brightness for your work
environment, tap the Adaptive brightness setting. Tap Adaptive brightness
to toggle the setting on
•
To set the brightness level manually, verify the Adaptive brightness setting
is turned off
brightness level.
Automatic mode for maximizing battery life in cold storage environments and
average window defrost times. Manual mode is disabled.
or off
, and then tap Brightness level. Adjust the slider to set the
75 Series Mobile Computer User Guide
.