Install A Microsd Card In A Ck75 - Honeywell CN75 User Manual

7. Close and latch the microSD card holder and SIM card holder.
8. Close the card access door and install the two screws.
9. Install the battery. Press down firmly on the bottom of the battery, and make
10. Attach the handstrap.
11. Press the Power button. Once the computer finishes the power up sequence
12. Select how you want the microSD card used: Use as portable storage or
13. Tap Next and then Done once the SD card is ready message appears.

Install a MicroSD Card in a CK75

You need a slotted screwdriver to install the microSD card. Format the microSD
card before initial use.
1. Press and hold the Power button, and then select Power off.
2. Remove both ends of the handstrap.
3. Remove the battery (see page 9).
75 Series Mobile Computer User Guide
sure that the battery release tab is fully engaged.
and identifies the new card, a set up query appears.
Use as internal storage.
29