Enable Vibrate Mode; Configure Audio Settings - Honeywell CN75 User Manual

Enable Vibrate Mode

You can use the Volume down button to quickly enable Vibrate mode so the
computer vibrates instead of emitting sound for notifications and rings.
If you still want to hear alarms, turn on the Alarms only feature.
1. Press the Volume Down button until the computer vibrates.
2. To turn on the Alarms only feature, press the Volume Down button again with
The status bar at the top of the screen indicates the active mode:
•
•

Configure Audio Settings

This section describes additional audio and sound settings you can configure in
the Settings app.
•
Setting
Volume
Also vibrate for calls
Do not disturb
Phone ringtone
Default notification ringtone
26
• Use the slider for notifications and rings.
• Use the slider for media (e.g., music, videos and other media).
• Use the slider for alarms.
the volume slider open.
When vibrate mode is active,
When Alarms only mode is active, the Do Not Disturb icon
To change audio settings, start the Settings app and tap Sound & notifications.
appears.
Description
Use the sliders to adjust the volume level for media (music, videos
and other media), alarms and rings (notifications and ringtones).
Enable or disable vibration when the phone rings.
• Set what kinds of alarms, notifications, events, or selected
callers are allowed to interrupt Do not disturb mode.
• Set rules for automatically turning Do not disturb mode on or off
(e.g., weekend, weeknight, or during calendar events).
Select a ringtone.
Select a notification sound.
75 Series Mobile Computer User Guide
appears.