Use The Scan Demo App; Change The Scan Demo Symbology Settings - Honeywell CK65 Series User Manual

Use the Scan Demo App

Use the Scan Demo app to read bar codes or to test your symbology decode settings.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Demos.
3. Swipe left or right on the screen until Scan Demo appears under the turntable.
4. Point the scanner window at the bar code.
5. Press and hold any Scan button (i.e., right, left, or front) or tap and hold the on-
6. Center the aiming beam over the bar code. Make sure the entire bar code is
7. Release the Scan button when the computer beeps, and the Scan Status LED
.
Note: In the Scan Demo app, not all bar code symbologies are enabled by default. If a bar
code does not scan, the correct symbology may not be enabled.

Change the Scan Demo Symbology Settings

1. In the Scan Demo app, tap in the upper right corner of the screen.
2. Select Symbology Settings.
3. Modify the symbology parameters.
4. Tap Back to return to the Scan Demo app.
42
Tap the center of the box image to open the app.
screen Scan button.
inside the illumination frame.
briefly turns On. Bar code information appears on the screen.
• Tap the check box next to a symbology name to enable (check mark) or
disable (no check mark) decoding for that symbology.
• Tap the symbology name to view and modify additional configuration
parameters for the symbology selected.
CK65 Mobile Computer