Activate The Umts Phone - Honeywell CN75 User Manual

2. Tap and hold --Please Select--, and then select a carrier from the list.
3. Tap OK to confirm carrier change.

Activate the UMTS Phone

You use a SIM card to activate the UMTS phone on your CN75/CN75e WWAN
model computer. You can purchase the SIM card from your network provider.
A Phillips screwdriver is needed to install the SIM card.
Note: Phone features are only supported on CN75 and CN75e WWAN models (CN75WAN).
1. Select a network carrier. For more information, see
2. Press the Power button, and then select Power off.
3. Detach one end of the hand strap from the computer (see page 8).
4. Push the battery latch toward the bottom of the computer until the battery
5. Remove the two Phillips screws and open the card access door.
50
• If the update is successful, the Carrier Selection screen appears and displays
the updated carrier information.
• If the update is unsuccessful, a message box appears. Tap Ok to return to the
Carrier Selection screen.
Between Network Carriers
releases, and then lift the battery away from the computer.
on page 49.
75 Series Mobile Computer User Guide
How to Add and Switch