Honeywell CN75 User Manual page 78

3. (Optional) If the device you want does not appear in the list, make sure the
4. Tap a device on the list to initiate a pairing request.
5. When the pairing request message appears, verify the Bluetooth pairing code is
6. (Optional) Once paired to a device, you can connect manually to the device.
•
•
68
A list of available Bluetooth devices appears.
device is turned on and set to discoverable, tap
the same on both devices and then tap Pair.
If the pairing request requires a PIN, enter the PIN and tap OK.
When the device is paired with the computer, the device name appears under
Paired Devices at the top of the list.
Tap the paired but unconnected device.
When the computer and paired device are connected, they show as connected
in the list. The status icon changes from
To disconnect a paired device, tap the name of the paired device and then tap OK
when the Disconnect? screen appears.
To unpair a device, tap the
, and then tap Refresh.
to
next to the device and then select Forget.
75 Series Mobile Computer User Guide
.