Activate The Cdma Phone; Make A Phone Call - Honeywell CN75 User Manual

12. Press the Power button.
Note: AT&T network users, tap Yes if prompted to allow automatic connection selection for
the SIM card. If you are using a custom APN, select No. You must manually configure
the connection instead of using the automatic option. Connection charges may
apply.

Activate the CDMA Phone

To activate the CDMA radio module in your mobile computer, you need to contact
your wireless carrier and set up an account.
You also need to provide the carrier with the Mobile Equipment Identifier (MEID)
for the computer. You can find the MEID:
•
•
Note: For the CDMA phone, settings are permanently stored in the WWAN radio after
activation. CDMA settings persist through a factory data reset.
The activation process is slightly different for each CDMA carrier. In general, you
need to contact your wireless provider and give the provider the MEID for the
computer.
1. Select a network carrier. For more information, see
2. Contact your wireless provider and give the provider the MEID for the computer.
3. If your carrier is Sprint, reboot the computer. As soon as the Sprint network
Note: Data connections are to the public domain on your network.

Make a Phone Call

Once the phone is activated, you can make a phone call.
Note: Phone features are only supported on CN75 and CN75e WWAN models (CN75WAN).
1. On the Home or All Apps screen, tap
52
on a label located in the battery compartment.
on the outside of the computer shipping box.
Between Network Carriers
detects your phone, Hands-Free Activation (HFA) begins, and a series of
notification messages appear. When activation is complete, a completion
message appears and the WWAN radio reboots. The phone is ready to use.
If your carrier is Verizon, tap Phone
press Talk. After a short wait, a message appears, confirming either success or
failure of the activation. After successful activation, the phone is ready to use.
on page 49.
, enter *228 on the phone keypad, and
.
75 Series Mobile Computer User Guide
How to Add and Switch