Delete A Scanning Profile; Scan Bar Codes - Honeywell CN75 User Manual

About the On-Screen Keyboard
If you want to use the on-screen keyboard when you input a new profile name:
1. Tap the profile name field.
2. Tap the keyboard icon in the lower right corner of the screen.
3. Tap the on/off button next to Show input method enable

Delete a Scanning Profile

Open the Internal Scanner profile list. Tap and hold the profile you want to delete,
and then select Delete.

Scan Bar Codes

The internal imager supports omni-directional (360°) bar code scanning. An
aiming beam is provided to help assist with targeting when scanning bar codes.
Note: Before you start scanning bar codes, use the Settings app to enable only the bar code
symbologies that you need. By reducing the active symbology list, you can increase
the scan speed.
1. Point the computer at the bar code. For optimum performance, avoid reflec-
2. Press and hold the Scan button.
3. Center the aiming beam over the bar code. When the scanner successfully
4. Release the Scan button.
75 Series Mobile Computer User Guide
keyboard. You may have to select the add profile icon again.
tions by scanning the bar code at a slight angle.
reads the bar code, the computer beeps, and the Good Read LED turns on
briefly. The bar code information is entered into the application in use.
the on-screen
45