Cisco TelePresence SX10
Introduction
xConfiguration Video Selfview OnCall Mode
This setting is used to switch on self-view for a short while when setting up a call. The Video
Selfview OnCall Duration setting determines for how long it remains on. This applies when self-
view in general is switched off.
Requires user role: ADMIN, INTEGRATOR
Default value: On
USAGE:
xConfiguration Video Selfview OnCall Mode:
where
: Off/On
Mode
Off: Self-view is not shown automatically during call setup.
On: Self-view is shown automatically during call setup.
xConfiguration Video Selfview OnCall Duration
This setting only has an effect when the Video Selfview OnCall Mode setting is switched On. In
this case, the number of seconds set here determines for how long self-view is shown before it
is automatically switched off.
Requires user role: ADMIN, INTEGRATOR
Default value: 10
USAGE:
xConfiguration Video Selfview OnCall Duration:
where
: Integer (1..60)
Duration
Range: Choose for how long self-view remains on. The valid range is between 1 and 60
seconds.
Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017.
D15333.07
About the API
xConfiguration
xConfiguration
Mode
Duration
xCommand
82
API Reference Guide
xStatus
Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.