Clearing Lcd Error Messages - Dell 1600n User Manual

Clearing LCD Error Messages

Display
[Bypass Jam]
Cancel ?
1:Yes 2:No
[COMM. Error]
CRU Fuse Error
[Low Heat Error]
Heating Error
Open Heat Error
[Over Heat]
Delayed
Function Full
Document Jam
[Door Open]
Enter Again
Funtion Not
Available
Group No. is
assigned
Group Not
Available
Meaning
A paper jam has occurred in the Bypass tray or
the machine detects non-feeding from the
Bypass tray.
Your machine's memory is full and cannot
store the document to send a fax into its
memory.
The machine has a communication problem. Ask the sender to try again.
There is a problem in the fuser unit.
The delayed fax jobs are full.
The loaded document has jammed in the
Automatic Document Feeder (ADF).
The front or rear cover is not securely latched. Close the cover until it locks into place.
You entered an unavailable item.
You have tried to use a combination of
machine functions that can not be used at the
same time.
The group dial location you tried to select has
speed dial numbers assigned to it.
You have tried to select a group location
number where only a single location number
can be used, such as when adding locations for
a broadcasting operation.
Suggested solutions
Clear the paper jam. See page 162.
Load paper in the Bypass tray.
To cancel the fax job, press the 1 button to
accept "Yes."
If you want to send the pages that were
stored, press the 2 button to accept "No." You
should send the remaining pages later when
memory is available.
Unplug the power cord and plug it back in. If
the problem persists, please call for service.
Cancel the unnecessary delayed fax job. For
details, see page 135.
Clear the document jam. See page 160.
Enter the correct item again.
Reduce the number of selected functions or
use only one function at a time.
Press <Return> to start over with another
group dial location.
Use a speed dial number or dial the number
manually using the number keypad.
Trou ble sho oting
169