Sending A Fax Manually - Dell 1600n User Manual

Adjust the document resolution to suit your fax needs (see page 120).
2
If you need to change the contrast, see page 116.
Enter the remote fax phone number using the number keypad.
3
You can use one, two or three-digit speed or group dial numbers. For details, see
"Automatic Dialing" on page 127.
Press <Send Fax>.
4
When the document is loaded from the scanner glass, the display shows "Another
5
Page?" on the top line after the document is scanned into the memory. If you have
the next page, remove the scanned page and load the next page from the glass and
select "1:Yes". Repeat as necessary.
After all of the pages are scanned, select "2:No" when the display shows "Another
Page?"
The number is dialed and then the machine begins sending the fax when the remote
6
fax machine is ready.
NOTE: When you want to cancel the fax job, press <Cancel> at any time while sending
the fax.

Sending a Fax Manually

Load the document(s) face up with top edge in first into the ADF.
1
OR
Place a single document face down on the scanner glass.
For details about loading a document, see page 118.
Adjust the document resolution to suit your fax needs (see page 120).
2
If you need to change the contrast, see page 116.
Press <On Hook Dial>. You hear a dial tone.
3
Enter the remote fax machine's fax number using the number keypad.
4
When you hear a high-pitched fax signal from the remote fax machine, press
5
<Send Fax>.
NOTE: When you want to cancel the fax job, press <Cancel> at any time while sending
the fax.
121
Faxing