Changing The Default Settings - Dell 1600n User Manual

Press <Start Copy> to begin copying.
6
Your original document is divided into 9 portions. Each portion is
scanned and printed one by one in the following order:

Changing the Default Settings

The copy options, including contrast, image quality, copy size, and the number of copies,
can be set to the most frequently used modes. When you copy a document, the default
settings are used unless they are changed by using the corresponding buttons on the
operator panel.
NOTE: While you set copy options, pressing <Cancel> cancels the changed settings and
returns to the default status.
To create your own default settings:
Press <Menu> on the operator panel until "Copy Setup" appears on the top line of
1
the display.
The first menu item, "Default-Change", appears on the bottom line.
Press <Select> to access the menu item. The first setup option, "Contrast"
2
appears on the bottom line.
Press the scroll button ( or ) to scroll through the setup options.
3
When the option you want to set appears, press <Select> to access the option.
4
Change the setting using the scroll button ( or ) or enter the value using the
5
number keypad.
Press <Select> to save the selection.
6
Repeat steps 3 through 6, as needed.
7
To return to Standby mode, press <Return>.
8
9 4
Copy ing