Honeywell touchpoint Pro Operating Instructions Manual page 72

MAN0923_Issue 3_04/15 Touchpoint Pro
Operating Instructions
5. User Interface
5.3 User Interface Software
The User Interface Software is accessible in three different ways - by local touchscreen at the Touchpoint
Pro Controller, by Web Server, and by the optional PC Configuration Software. A detailed menu structure of
the software is given in the Appendix - User Interface Software Menu Structure.
Touchpoint Pro does not need a user licence but, for security reasons, the optional PC Config and Web
Server software do.
Please contact your local Honeywell supplier or distributor to obtain a 12-month user licence. They will
need your Company details, a valid e-mail address, and the serial number of the Touchpoint Pro system.
In return, they will e-mail you the licence token and details on how an authorised Honeywell Engineer can
install it in the system, and details on how to activate the licence on a maximum of five PCs.
You will be notified shortly before the expiry of your licence, and you will have a short licence extension in
which to renew the licence token, if you want to.
Please note that expired licences do not stop Touchpoint Pro from working. They will merely stop
you operating it remotely, and you will have to operate it from the touchscreen instead.
Please save your licence token carefully in case of a PC or system malfunction. While replacement
licences can be reissued or transferred to other PCs within the licence period, lost tokens cannot be
replaced and you will have to purchase a new 12-month one.
When renewing/transferring your licence, you must use (or supply) the same e-mail address that you used
for the original licence. Failing to do so will automatically bill you for a completely new licence.
5.4 Local Interface (Touchscreen)
The touchscreen is a resistive type, which can be activated using a finger or a stylus. All interactions are
single tap.
Caution: Do not use sharp objects as damage could be caused to the screen
5.5 Web Server
The Web Server is an external interface that provides web clients with data from the Touchpoint Pro
System. This facility allows remote access to Touchpoint Pro to view live status, and analyse event history.
It is also possible to acknowledge, inhibit and reset I/O channels. Calibration and configuration are not
available over the Web Server.
The Web Server supports 5 concurrent web clients, however it does not restrict further users from
connecting. System performance may be degraded in this case.
Note: The Web Server is compatible with Internet Explorer version 8 . Please refer to Chapter 6,
Commissioning for the necessary settings. The following browsers are also supported:
72