Specifying An I-Fax Address - Canon CLC5151 Sending And Facsimile Manual

4
Select [On] or [Off] for <Divided Data Destination>.
Details of each item are shown below.
[On]: Select [On] if the destination's e-mail software has a function to combine divided data.
If the size of the data being sent exceeds the value set for Maximum Data Size for
Sending in E-mail/I-Fax Settings in Communications Settings in System Settings (from
the Additional Functions screen), the data is divided into multiple parts before being
sent. Once the destination machine receives all of the parts of the data, it combines
them into one item of data.
[Off]: Select [Off] if the destination's e-mail software has no function to combine divided data.
If the size of the data being sent exceeds the value set for Maximum Data Size for
Sending in E-mail/I-Fax Settings in Communications Settings in System Settings (from
the Additional Functions screen), the data is divided into separate pages and sent as
multiple e-mail messages.
IMPORTANT
Make sure to check the specifications of the destination's e-mail software before setting this
mode. A sending error may occur if the destination's e-mail software is not able to combine
divided data.
NOTE
For more information on the maximum data size for sending, see "E-Mail/I-Fax Settings," on
p. 11-5.
5
Press [OK].

Specifying an I-Fax Address

You can specify a new I-fax address. Regardless of the distance and area, I-fax helps you to
reduce transmission costs by making transactions via the Internet. You can enter an I-fax
address directly from the keyboard on the touch panel display. You can also specify the scan
settings and the settings at the destination when using I-fax.
Specifying Destinations Using the New Address Tab
2
2-7