Checking/Changing The Status Of Fax Jobs; Checking Fax Job Details - Canon CLC5151 Sending And Facsimile Manual

Checking/Changing the Status of Fax Jobs

This section describes how to check/change the status of fax jobs. For more information,
see Chapter 5, "Checking Job and Device Status," in the Reference Guide.
NOTE
• If the optional iR Security Kit is activated and Job Log Display in System Settings (from the Additional
Functions screen) is set to 'Off', [Log] is not displayed on the System Monitor screen.
• This mode is available only if the optional Super G3 FAX Board is installed.
• The maximum number of jobs that are displayed is:
- Send Job Status screen:
- Received Job Status screen:
- Log screen:

Checking Fax Job Details

You can check the detailed information of any fax job, such as the destination and the date and
time the job was specified.
1
8
8-10

Checking/Changing the Status of Fax Jobs

64 jobs
1 job (The optional Super G3 FAX Board is installed.)
100 jobs
Press [System Monitor].
If necessary, see the screen shot in step 1 of "Checking Send Job Details," on p. 8-2.