Selecting a Scan Mode
You can set the scan mode that a document is scanned in. The machine has the following
preset scan modes:
•
If the Color Universal Send Kit (standard-equipped for the iR C4580i/iR C4080i) is activated:
- Eight scan modes: Clr/B&W 200 x 200 dpi, Clr/B&W 300 x 300 dpi, B&W 200 x 200 dpi,
B&W 300 x 300 dpi, Clr/Gray 200 x 200 dpi, Clr/Gray 300 x 300 dpi, Clr/Gray 600 x 600 dpi,
and B&W 600 x 600 dpi (Clr stands for colour.)
3
•
If only the optional Super G3 FAX Board is installed:
- Four scan modes: Black 200 x 100 dpi, Black 200 x 200 dpi, Black 200 x 400 dpi, and Black
400 x 400 dpi
Select the desired mode from the preset scan modes or user defined scan modes (user preset
keys), according to the type of original that you are sending.
NOTE
• If you want to use less memory and make the sending time shorter, use a lower resolution mode.
• You can adjust the preset scan modes and create new scan settings. However, since changed scan
settings are not automatically saved, it is useful to register a new scan setting if you use it frequently.
(See "User Preset Keys," on p. 4-18.)
• You can change the settings and assigned names for the eight preset scan keys, and store them as user
defined scan modes (user preset keys).
• In addition to the scan mode, you can store addresses and other send settings in the favorites buttons.
(See "Favorites Buttons," on p. 9-15.)
• To cancel the scan settings, press the Scan Settings drop-down list
• If [Preview] on the Send Settings screen is set, you can verify the images from the Preview screen
before sending your document. (See "Previewing Originals," on p. 5-21.)
• To cancel all settings and return the machine to the Standard mode, press
3-2
Selecting a Scan Mode
➞
➞
press [Option]
[Cancel].
.