Handling Documents That Fail to Be Forwarded
You can set how the machine handles the documents that fail to be forwarded.
NOTE
If Erase Failed TX in TX Settings under <Common Settings> in Communications Settings (from the
Additional Functions screen) is set to 'Off', the status of any job with a forwarding error will be saved on
the System Monitor screen. The document will not be processed according to the settings you make for
Handle Documents with Forwarding Errors. (See "Automatic Document Deletion," on p. 9-9.)
1
Press
<Common Settings> ➞ [Handle Documents with Forwarding Errors].
2
Select [Always Print], [Store/Print], or [Off] ➞ press [OK].
Details of each item are shown below.
[Always Print]: Documents that fail to be forwarded are printed.
[Store/Print]: Documents that fail to be forwarded are stored in the Memory RX Inbox. The
[Off]:
➞ [Communications Settings] ➞ [TX Settings] under
machine automatically prints the documents that fail to be forwarded if Use Fax
Memory Lock or Use I-Fax Memory Lock mode is set to 'Off'. (See "Storing
Received Fax Documents in Memory," on p. 11-12, "Storing Received I-Fax
Documents in Memory," on p. 11-13.)
Documents that fail to be forwarded are not printed.
Handling Documents That Fail to Be Forwarded
9
9-11