Setting the Display Language
If you decide to switch the display language, set Language Switch to 'On' before entering
characters.
If Language Switch is set to 'Off', and then you set it to 'On' after entering characters, the
characters may not be displayed correctly. In this case, re-enter the characters after setting
Language Switch to 'On', or enter characters with Language Switch set to 'Off'.
Selecting the Type of Telephone Line
Set the type of telephone line that is connected to the machine.
If this setting is incorrect, you will be unable to communicate with other machines. Be sure to
check the type of telephone line that you are using, and make the correct setting.
NOTE
For this setting, the optional Super G3 FAX Board is required.
1
Press
<Fax Settings> ➞ [Tel Line Type].
2
Select the type of telephone line ➞ press [OK].
If you do not know the telephone line type, call your telephone service provider for details.
➞ [Communications Settings] ➞ [User Settings] under
Things You Must Do Before Using This Machine
1
1-15