Gamma Value for YCbCr Send Jobs
If you are sending to an e-mail or file server destination, you can specify the gamma value used
when converting scanned RGB image data to YCbCr. By setting a gamma value corresponding
to the gamma value at the receiving end, sent image data can be printed with the appropriate
image quality at the receiving end.
NOTE
• This mode is available only if the Color Universal Send Kit (standard-equipped for the iR C4580i/iR
C4080i) is activated.
• If the optional Super G3 FAX Board is installed and you are sending documents by fax, this setting is
disabled.
1
Press
<Common Settings> ➞ [Gamma Value for YCbCr Send Jobs].
2
Select the gamma value ([Gamma 1.0], [Gamma 1.4], [Gamma 1.8],
or [Gamma 2.2]) ➞ press [OK].
➞ [Communications Settings] ➞ [TX Settings] under
Gamma Value for YCbCr Send Jobs
9
9-31