Job Build - Canon CLC5151 Sending And Facsimile Manual

Job Build

This mode enables you to scan originals that are too many to be placed at once, by dividing
them into multiple batches. You can use both the feeder and the platen glass for scanning.
The originals are sent as one document after all of the batches have been scanned.
IMPORTANT
• The Job Build mode cannot be used with the Document Size Select (Other Size or Long Strip Original)
mode.
• The Job Build mode cannot be used when sending a fax document in the Direct Sending or Manual
Sending mode.
• You cannot change the scan settings while the machine is scanning originals in the Job Build mode.
You need to set the necessary scan settings beforehand, according to the type of originals and the
desired result.
• You can change or specify the following settings before scanning the next batch of originals (i.e.,
between batches): the Document Size Select (Auto or manual) mode, scan exposure, original type,
2-Sided Original, and colour mode.
• If you place your originals into the feeder, remove the originals from the original output area when the
scanning of each batch is complete.
• The maximum number of pages that can be sent at one time is 999. When using the Job Build mode,
a message appears to ask you if you want to send the job when 999 pages of originals have been
scanned. If you select to send the job, the scanned 999 pages are sent. If you cancel the job, the
scanned pages are not sent.
NOTE
• If you place different size originals into the feeder, set the Different Size Originals mode.
• If you want to scan one-sided and two-sided originals and store them as two-sided documents, divide
the originals into one-sided and two-sided batches. For example, if the first batch consists of two-sided
originals, set the 2-Sided Original mode. Thereafter, you have to manually set or cancel the 2-Sided
Original mode for each batch of originals that you scan.
4
4-11

Job Build