[Password]:
Press [Password] ➞ enter a password ➞ press [OK].
Re-enter the password for confirmation ➞ press [OK].
After pressing [OK], the password that you entered appears as asterisks (********) on the
Register screen.
[Domain Name]:
Press [Domain Name] ➞ enter a domain name ➞ press [OK].
Enter the directory tree name of the Active Directory, such as
<team1.salesdept.canon.co.jp>.
<Display authentication dialog when searching>:
[On]: When searching for information on the server, a login information dialog box is
displayed even if a password is not required.
[Off]: When searching for information on the server, a login information dialog box is not
displayed.
NOTE
If Use Asterisks to Enter Access No./Passwords in System Settings (from the Additional
Functions screen) is set to 'Off', the password that you enter is not displayed as asterisks on the
Password screen. (See Chapter 6, "System Manager Settings," in the Reference Guide.)
Changing an LDAP Server Setting
You can change the settings for a stored LDAP (Lightweight Directory Access Protocol) server.
1
Press
2
Select the LDAP server whose settings you want to change ➞
press [Edit].
3
Change the necessary settings ➞ press [Next].
➞ [System Settings] ➞ [Register LDAP Server].
11-55
LDAP Server Settings
11