3
● If there is only one destination:
● If there are multiple destinations for the same sending method:
Printing the Send Job Status/Log
1
2
8
8-8
Checking/Changing the Status of Send Jobs
Select the destination to resend the job to.
❑
Press [Resend].
❑
Press [Broadcast List].
❑
Select the destination to resend the job to ➞ press [Resend].
NOTE
The job is placed in the send queue if there is another job being sent or waiting to be processed.
Press [System Monitor] ➞ [Send] ➞ select [Status] or [Log].
If necessary, see the screen shots in step 1 and step 2 of "Changing the Destination," on
p. 8-5.
Details of each item are shown below.
[Status]: Press this key if you want to print the send job list (Send Job List).
[Log]:
Press this key if you want to print the send job log (Activity Report).
Press [Print List].
IMPORTANT
You cannot print the Send Job List for fax jobs sent with the Direct Sending or Manual Sending
mode, or sent from computers via the fax driver because the statuses of those jobs are not
displayed.